Video: Transform Interiors with AI: Ceilings, Paint Walls, Existing Walls in Minutes | Duration: 1704s | Summary: Transform Interiors with AI: Ceilings, Paint Walls, Existing Walls in Minutes | Chapters: Introducing Takeoff Boost (7.36s), Takeoff Boost Features (242.345s), Ceiling Plan Takeoffs (436.42s), Boost Ceiling Features (562.17s), Takeoff Layer Analysis (822.5s), Advanced Takeoff Features (1137.83s)
Transcript for "Transform Interiors with AI: Ceilings, Paint Walls, Existing Walls in Minutes": Good afternoon, everyone. This is Chad Broome with ConstructConnect, and welcome to our bid like a boss feature where we the team here at ConstructConnect dives deep into each of our data and takeoff estimating products to show you what we're doing and to help you and hopefully help others at your office bid like a boss. Today, we'll be focusing on the new on screen takeoff four point o, software and some tips and tricks on using, Boost. Blake, are you there with me? Yep. Sorry about that. Seems like it was just kinda delayed there. Most should be good now. Excellent. And so just a couple reminders for us before we get started with the content today. Your microphones are muted, but you can use the chat session to ask questions throughout the session. The session is being recorded and will be available after the event. To view the recording, you can come back to the same website you went to join, and the live event should be there and available. Anyone else from your company wants to view the recording, they'll just need to register for the event much like you did, and they can then view the recording as well. We recommend to go into full screen mode while we're demonstrating the product today and so it's easier to see for everyone. And you can go into full screen mode by clicking that square icon in the bottom right hand corner of the screen, I believe. Excellent. So today, let's let's get into our session. I'm Chad Broome. I'm currently the strategic success manager here at ConstructConnect. I've been with the company over twenty five years. I can't believe I've said that. I've worked with probably many of your companies over the years in the past, we have with us today Blake. And Blake is one of our, project managers. He's been working on the Takeoff Boost product for nearly two years now. Prior to that, he worked on software for the local governments and building permitting and licensing, code enforcement, and such. So, hopefully, Blake can kinda chat through things in a sense that makes sense to you. Blake really likes working with our customers and helping them improve their processes. I'll be here as your moderator for today's call and monitor the chat group for any questions coming in with Blake. But for now, I'm just gonna hand it off to Blake. And, Blake, you can take it from here. Awesome. Thanks, Chad. I appreciate the introduction. Nice to, be here with everybody. I'm excited to show you what what we got. So we'll show you kind of some of the new things that are in on screen takeoff, four point o if you have not yet upgraded, some takes and tips and tricks for using takeoff boost, show you how to run takeoff boost if you've never done it before, as well as how to work with those results. We have a new way to reassign conditions, which, you know, if you haven't used boost before, that's gonna be kind of like a a newer thing as opposed to creating those conditions from yourself, yourself, as well as, the connect linears option and some trade specific use cases, and then we can go right into a q and a after that. So without further ado, we can just get right into it here. I'm going to show you how Takeoff Boost works on a few different floor a few different plans. Boost is really good on floor plans and reflected ceiling plans, whether you're you're installing drywall, you're doing insulation, or you're doing paint. And I can show you how to work through, all of those scenarios no matter which where, which way you're coming from there. So you can see here I've got a a floor plan. We kinda just dive into the details a little bit more, you can see the wall symbols here are, like, kind of that square shape. You know, we might wanna be counting toilet, sinks, that kind of thing. So in order to start takeoff boost, you just come up here into the this corner. There'll be a green button that says takeoff boost. You can hit that, and you'll get kind of a menu of options here depending on the kind of takeoff that you wanna do. And it'll be different depending on, you know, like I mentioned, where you where you're coming from and what kind of takeoffs actually matter to you. In this case, I'm just gonna take off everything that we can on this floor plan so you can kinda see the full capabilities of Boost. So this first option, this footprint area, this will give you the total square footage of that floor plan. The net area will do the same thing except for each individual room, corridors, closets, that kind of thing. Ceilings, I'll show you what that looks like on a reflected ceiling plan. So those are all of my area conditions. Now if I wanted to do come and do, like, a linear take off, specifically walls, we have two different options for you, in that case. There's the walls option, and this is the reason why I pointed out that square symbol earlier. So you select, you can either just do walls by themselves with no tag. Maybe you're doing, a budgetary estimate. Those tags aren't there. You just need to get the linear of the of the room. You could certainly do that. But in this case, we wanna break it down a little bit further and actually get those different types. So I'm gonna select that symbol here. So this walls option, this will actually give you a single double sided wall anywhere you see these a types. If you're doing painting or if you just wanna do a single sided, takeoff instead where you get two linears here, there's this painting option as well, and that's what that will produce. There's not any existing walls on here. I've got a plan that does have existing walls. I can show you what that looks like. But the idea behind these options that you get right here between walls and painting is there's a couple of additional features when it comes to those walls. Right? Maybe there's existing walls on that plan. If you wanna identify those separately or just not take them off at all, we have options to do that. And then this is a brand new option that we just released here in the last few weeks, which is default heights. And the exciting about exciting thing about default heights is that it works in a couple of different ways depending how you're doing your takeoff. In this case, for this floor plan, what it's gonna do is just assign a default height to every single, wall here. So you can kinda think about it, like, you know, whenever you have those project notes down in the bottom of the floor plan and it says, all walls are this height unless otherwise noted, that's that's kind of how this option is working. It's just gonna apply that height to all of your walls. Now we can also do some counts here. So we don't have any elevators on this plan. I'll just take that off. In this case, we have windows that have a type. You can see that hexagon shape. So we'll we'll assign those window types. And then you can count all kinds of doors and plumbing fixtures. So single doors, double doors, uneven doors, all that stuff's gonna get picked up as well as bathtub, sink, showers, toilets, urinals, everything in that area too. And something that's really good about this these counts is even if you see a count that you might wanna count like mirrors that is not here, you can actually use these counts as kind of like a proxy for that. Right? So you know that just about about every single sync, there's gonna be a mirror. Right? So you can go through and count your syncs. You'll know that's how many mirrors that you're probably gonna need on this plan too. So I'm gonna run takeoff boost, and it'll take a little bit to run, but you don't have to sit here and wait for it. I can actually go right onto the next one. And that is I'm using a different little development environment here, so let me just try that again. Alright. All my options are still selected. Let's run that. Okay. Perfect. So I'm gonna go on to the next page. Just like I said, that's my floor plan. Let me show you what it looks like on the reflected ceiling plan. And keep in mind, this is gonna be running the whole time, so you'll kinda see some options over here processing over here, as those populate. But you don't need to go sit sit there and go through one plan at a time. Right? You can let boost run-in the background, go right off to that next takeoff, and then make those things just go a lot faster for you as you need it. So in this case, I've got a reflected ceiling plan. And there's a couple of different options with reflected ceiling plan. I'll start with this most basic one and then show you what a little bit more of an advanced use case looks like. So in this case, this is just a gypsum board ceiling and some ACT. Right? So we'll just do a basic takeoff here. And, additionally, if you're a painter, I know there's a lot of painters that like to do their, wall takeoff on reflected ceiling plans. Boost can certainly do that. That painting option that I showed you will work just as good here as it does on the floor plan. So for this one, we will just do ceiling takeoff, and you can see those conditions are kinda starting to come in now. So you can see all that. Those are all the conditions that you would otherwise have to make yourself that Boost is creating for you. So in this case, there's no ceiling tags on this plan. It's just the pattern for the ACT and the gypsum board. So we're not gonna select any tags. Not gonna do walls here, just that painting option. And we can apply a default height here. In this case, I'll just leave it blank to kinda clarify the the different conditions that we're making here and then just run this. So I'm gonna run a ceiling takeoff to detect all of the chips on board in ACT as well as some single sided walls here for painting. Gonna run boost, and I'm gonna keep chugging along on takeoffs here. And then once we go through all of these plans, we'll show you how to work with Boost results. So this next, reflected ceiling plan is pretty much the same as what you saw earlier, but now we have this additional option of ceiling tags here. Right? So you've got, like, the c one here, c two, and it also has the height in here. So one of the really cool things about this is not only can Boost differentiate between acoustical ceiling tile and gypsum board patterns, it can also differentiate these different tags here. So if you have a c one ACT and then a c two maybe gets, a special kind of finish, it's gonna differentiate that. It's also gonna capture this height for these default, for these walls. So if you are a painter and you're doing your wall takeoff on a reflected ceiling plan and it's got these heights here, it's not gonna use just that default height. It will actually use this height here too. So like I mentioned, that option kind of works as, like, unless otherwise noted. Well, you can see here, it's it's otherwise noted. Right? It's eight foot high, nine foot high. So we're gonna we're gonna default using that instead of the default height. So let me show you what that looks like. I'll just do the exact same kind of takeoff here that we did on that other reflected selling plan except this time, I will select my shape for oval to capture that tag. We'll do our painting option, and we'll assign a default height. We'll make it let's do, 12 feet on this one just so it's clear which ones are the default heights, for the demo here. And I'm gonna run Boost again. And there's just a couple of other things I wanna show you. So I'm gonna do take off on just a couple of more plans here, to kinda show you all of Boost's abilities. The other thing that Boost can do is differentiate these out of scope or not in contract areas. So if you're taking off a, you know, a renovation or an addition to a building, oftentimes, you're gonna see this not in contract, not in scope, existing area kind of pattern. Right? I'm gonna just do a really basic takeoff on this plan so you can see how Boost handles this. What it's gonna do is create a separate condition for those not in contracts. So that way, you still need it to just size the overall, square footage of the project, you can still have that. But it's easily differentiated, so it's not getting mixed up in the takeoff for the actual work that you're doing here. So I'm just gonna do a basic net area on this plan and run Boost. And then while those results are coming in, I'm going to do, one last boost takeoff here, and then we'll go through and start reviewing how to work with these results. So like I mentioned, there's those existing walls earlier. This is a example of a building that's getting renovated, and, it's got these existing walls out here on the edge. Right? So we can run Boost here, and just show you how Boost is handling those. So I'm just gonna do a basic walls take off here and identify existing walls. In this case, that existing wall, that outer wall is this gray tone, so I'm gonna select gray for that wall. And then we can choose to either include it, which means it's going to still get taken off just as a separate exist a separate wall. We can choose to remove it altogether, or only do your existing wall. So if you only wanted to get the existing walls, maybe you're painting those walls, you need to know which one of those is gonna get that extra just kinda finish on there. You could certainly do that. In this case, I'm just gonna exclude exclude it. We don't need to do any work on those walls. So we're just gonna make sure that it does not take those walls off. So, I'm gonna run that. And now we can go back to that first floor plan, and I'll kinda step through all of those results. So where are we at right now? We've done takeoff on one, two, three, four, and then this will be our fifth plan in the span of just a few minutes here, and you can see how much, boost has actually really boosted your takeoff. Right? We don't expect it to be perfect. We want you to be able to work with these results, and edit them easily. It's definitely not something that you're just gonna take and run it and hand off for a bid. You do need to, of course, come back and double check those results just like you would, with any kind of intern or other junior estimator that you might be working with. So, obviously, there's a lot here. There's a lot of takeoff that Boost has done. There's an easy way to step through this. We assign layers to every single type of takeoff that we're doing. So I'm just gonna turn off all the layers and step through these conditions one by one. The first being this footprint area. So like I mentioned, the footprint area is just giving you the overall square footage of the entire floor plan. So that's really all that is. It's just a very basic takeoff. It's just a single shape for that. And then I will turn that off, and we'll go over to our wall area. And you can see if you recall, there's two different kinds of wall takeoff. There's the walls and the painting walls or what we'll call wall surface in these layers. This is just that that double sided wall takeoff. So you can kinda we'll zoom in here, and you can see it's actually assigning these types. So we did assign that 10 foot height to this plan and then a 12 foot default height to the other plan. So you can see it's actually naming it here. It's telling you that, hey. This is a wall type a. The default height was 10, 10 foot, so I'm gonna put that in there. But it's also actually calculating that 10 foot value. So you can see it's getting that surface area of the square feet here using that 10 foot high default height that we put in here. It's also assigning it. So there's that wall type a. You can see this is a wall type d. So it's giving you that wall type d. Wall type b here. Now you could see there's a couple of areas where Boost just wasn't sure. So there's this wall type b. For whatever reason, Boost just got a little bit confused with this layer. So it just said, hey. I know that there's a wall here, but I'm not really sure what wall it should be. So I'm still gonna give it that 10 foot height that we asked for for this floor plan, but I'm not sure what wall type it should be. We know what the wall type be because we could see that. We also see that it's done the same thing with this wall. In this case, there was just no type to assign it, so it wasn't sure, but it's still gonna do the takeoff for you. However, we can see that these are there's bunch of wall type b's around it. Right? So it's this is also probably a wall type b. You can just control and then click on both of these or sorry. It's a shift and click on both of these, and then just right click and then reassign it to that wall type b that it needs to be. So just super easy. Sorry. I thought I lost you, but I think I'm still here. Chad, can you hear me still? You're good. Right? Doing great. Perfect. No questions so far. I've been watching the, the. chat. Sorry about that. I've always loved to have a little bit of computer issues, right, whenever I'm I'm showing stuff. Okay. So let me let me try that again. I'm gonna reassign here over to that wall type b condition. And okay. So I'm not sure what's going on there, but we can reassign the objects from here too. So we'll just reassign it over to won't I be to what that should be. Okay. So now we can step through and show you what the other version of that takeoff looks like. So this is the painting option. Again, this is that's the instead of producing one double sided linear, this is gonna produce two single sided linears. So really good if you're doing painting takeoff, but also great if you need to do some floor trims. Right? You can use this easily for some floor trims. It's not gonna assign any types here, because, you know, this this is really targeted towards, like, doing those kinds of finishes, and there's not any finishes on this plan. So it's just gonna give that generic kind of wall surface type here, 10 foot option. And you can see just basically anywhere you would expect a double sided, linear to be produced. This painting option will give you just two single sided linears at that default height that you've been that's been specified here. Next thing is I will show you, our net areas. So just like with the footprint area, the net area, like I said, will just give you the square footage of whatever room. So you can see that it's giving you the square footage of this mechanical room. We got this little closet here. It's giving us the square footage of that closet, and that's pretty much what our net area does. It just does it across, the entire plan here for whatever whatever room you might need that square footage for. And then the last thing that we'll step through on this plan is the, count options. So I'm gonna select ceilings and counts so you can kinda see both of these. And you'll see that there's a door here, so it's counting that singles that single door here. Over here, there's that double door, so it's giving you the double door. You can see that it's identified this shower here, this toilet, the sink, all of those. It's producing all of those, counts for you. And these windows have types associated with them. So just like with walls, it's gonna assign the window type based off of the symbol. But you can see it's not always gonna be perfect. Right? So here's this wall type a. For whatever reason, it didn't catch it, but this is still saying that I know there's a window here, so I'm not just gonna ignore it altogether. I'm still gonna give you one. I'm still not gonna give it that condition. We can easily just go over there and then reassign it over to the a condition. Alright. So that is how you can kinda fix and correct the results on this floor plan for that takeoff. The next thing that I'll do is show you those reflected ceiling plans that we step through and how, you can work with those results as well. So alright. I'm going to turn on my reflected ceiling plan, and you can see boost is take it's it's taking off two different area types here. This gypsum wallboard for that speckled pattern as well as the ACT for the ACT grid. So it's using the patterns themselves. And then on the next page where there's actually tags, it's gonna use those tags instead. But right now, since there's no tags here, it's just using that pattern to detect it. And you can see if we zoom in here, it did not do a great job taking off these soffits here. Right? So, again, we don't expect it to be perfect. These are things that you should be able to come in here and easily fix. So I'll just come in here, tighten this up just a little bit, and you'll notice that it didn't catch this soffit here either. So, there's a couple of things that we can do with that. We can just move this out, tighten up those margins a little bit, and then we can use the split tool. My split tool has moved on me. Let's see. Where did that go? Ah, here it is. And we'll just draw a line right through it and then select that, and then you can reassign it over to that gypsum board condition. So that way, you're not totally it's not completely missed, right, just because it assigned it to the wrong area. You just easily break it off and assign it to the right condition that it should be in. And then to show you what the painting walls looks like, like I said, you could do it just, as well on the reflected ceiling plan as you can on the floor plan. And you'll actually see here on this next plan why it's even better to do it on the reflected ceiling plan over the floor plan. All of those single sided conditions just like you would expect it to be, to do the wall finish. Alright. So here's that next reflectance plan that we did, and this is the one that had the both the tags and the wall types. So let me just step back over to the ceiling type so you can see what that looks like. In this case, you can see it's assigned to this not only is it ACT, but it's ACT c one. Right? And then this is gypsum board c two. So you could actually determine that, hey. This is that c two, maybe it's getting a special kind of finish or a special kind of insulation. It's actually gonna separate all of those together. Other than that, it takes off exactly like it would the reflected ceiling plan that we just saw. It's gonna differentiate first by those patterns, gypsum board versus the acoustical ceiling tile, and then it'll utilize the tags to to further differentiate those. And if it doesn't fall into one of those, maybe it's like an exposed ceiling or metal or something along those lines, it'll just either use the tag if it's there, or it'll give it a generic ceiling condition so it's not getting confused with that net area condition that you're using for the floors. We're still gonna keep those split for you so that way you can easily keep all of your takeoff, nice and organized. And this is the really exciting thing that we again, we just released this here just a couple weeks ago for detecting those wall heights. So like I said, not only are we gonna do the default heights for you, if there's already a height in this room, we're gonna give it that height. So you can see this room had that eight foot high. It's gonna break that off into this eight foot height, wall condition. Same thing for this room. This room was nine feet high, so you can see it broke it out into that nine foot high room. And then if we go over here, you can see this room does not have any height associated with it. And remember, we gave this specific floor plan a 12 foot default height. That's what's getting assigned here, is that 12 foot default height because it says that, you know, there's walls here. I don't see any heights on here, so I'm just gonna give it that default height. So super exciting. If you're doing your wall takeoff, and you are able to do it on the reflected ceiling plan with those heights, highly recommend that so that way you can save a lot save yourself a lot of time with those different height conditions. Alright. So the last few things that I've got is to just show you how some of those additional features within Boost work. So if you recall, we just did the net area condition on this takeoff, and you can see it's broken this out into the net areas like we expected it to and then the not in contract area. Sorry. I'm hitting my hot keys a little bit too much. Let me go back over here. Just go back to my selector. You can see it's broken this out into the net area like it should be. And then this area that's not in contract, we're just listing it as out of scope. So you can keep these calculations for your overall square footage of the project if you need it, or you can just easily delete this area. No big deal. Right? I'll just come over here, and I'll delete it, and then it's gone. So now I only have the work that's actually in contract for me, and I don't have to worry about going through and highlighting it or making sure it you know, maybe it's a little bit more complicated where the, work that you're doing is actually surrounded by all these not in contract areas. You can easily differentiate those and separate them and and remove them from your takeoff. And then the last thing that I wanna show you are those existing walls. So if you remember, we did just a basic wall takeoff on this floor plan, and we said that we did not wanna include existing walls. We only wanted the walls that were in scope. So you can see, these gray areas are not taken off, and then this green wall condition was used to take off these walls, within the plan itself. And you can see that applies to the entire perimeter of the building, which is very common for these renovations. One of the most common complaints that we heard from customers was that, hey. I I'm doing a a tenant improvement or something where that outer perimeter wall is just an existing wall, I don't want it. Right? So this is a perfect example of that where now I don't have to go through and try and remove all of those walls. It's we'll just remove it for you. And even within this, plan, you can see over here where it's kinda just gone inwards a little bit, but you do have some in count contract walls right here. We will remove those and only take off those walls that you're actually doing work for. And then, likewise, say you're a painter, you actually do care about those existing walls, you can do this take off where you say include, and it'll still take off those walls as existing walls, but it'll do it as a separate condition. So that way, you know, hey, this is I don't need to do any prep work or anything like that or primer or whatever for this existing wall. I just need to touch it up. Right? You can still easily get those measurements and separate them from their those brand new walls that need to be painted. And that's really it. I mean, that's exactly how you can do your takeoff with Boost. You can see all of those areas that we've drawn. You're kinda moving from needing to do a takeoff from scratch to having just this really, really smart intern that does a really solid first draft of a takeoff for you, and all you need to do is go through and do some touch ups and then send it off for bed. And. oh, gotcha. Excellent. Great work, Blake. Thanks for taking the time to run through some of the latest features within OST and highlighting boost for everyone. If you like what you saw today and would like to get more details or information on it, click the get a demo button in the top right of the screen, and that'll let our team know to reach out to you after today's session with more details. We do these sessions each week through the bid like a ball series. So check out the next upcoming sessions, and feel free to register for any other sessions you would like to learn more about. And we also host in person class training each quarter to our takeoff products. So if you have one of our takeoff products and like to get in a little more in-depth hands on training, let us know. Please reach out to your account manager to get more details on that. If you already have OST and you just have a few questions or need some more support using our software, we have some different options here to contact our support team, customer service, or training team. So please don't hesitate to reach out. Thank you all for your time and joining us today, and, hopefully, those that watched the recording, can connect with us. We look forward to connecting with you. Have a great afternoon, everyone. I thought I did. Am I not here? Am I here now?